China OEM Three Phase 220V 380V 60W Induction AC Gear Motor with Hot selling

Product Description

A few Section 220V 380V 60W Induction AC Equipment Motor

one.Technical specifications:
one.motor measurement:ninety*90
two.motor power:60W
3.motor voltage:110/220/380VAC
four.rated pace:1300/2750r/min
5.reduction ratio:3 3.6 5 6 7.5 9 10 twelve.5 15 18 twenty 25 30 36 forty 50 sixty seventy five 90 a hundred a hundred and twenty one hundred fifty one hundred eighty 200
6.common application: health care equipment,packing equipment,printing machine,textile equipment,producing machine..
7.We can offer you this ac equipment motor with velocity controller,brake,terminal box,damping…
eight.We can adjust motor specifications and shaft size,motor shade in accordance to your requirement.

2.Generation Stream

three.Firm Data

 In current years, CZPT has been dedicated to the manufacture of the motor products and the primary merchandise can be classified into the pursuing collection, namely DC motor, DC gear motor, AC motor, AC equipment motor, Stepper motor, Stepper gear motor, Servo motor and Linear actuator series. 

Our motor products are widely utilized in the fields of aerospace industry, automotive industry, financial equipment, household appliance, industrial automation and robotics, health-related gear, workplace tools, packing CZPT and transmission industry, giving clients reliable customized options for driving and managing.


four.Our Solutions

1). Basic Support:


2). Customization Services:

Motor specification(no-load velocity , voltage, torque , diameter, sounds, daily life, tests) and shaft length can be tailor-produced in accordance to customer’s requirements.

five.Package deal & Shipping


How to Maximize Equipment Motor Trustworthiness

A gearmotor is a mechanical gadget utilised to transmit torque from 1 spot to another. As its name implies, it is developed to rotate one item relative to yet another. Its main use is to transmit torque from one particular point to yet another. The most typical sorts of equipment motors are: worm, spur, and helical. Each of these has certain capabilities and can be utilised for a assortment of apps. Trustworthiness is also an crucial element to take into account when choosing a gearmotor.

Applications of a gear motor

Even with its little dimension, a gear motor has a lot of applications. These include hefty equipment lifts, clinic beds, and electricity recliners. It is also located in several each day merchandise, this kind of as electromechanical clocks and cake mixers. Its versatility allows it to produce a higher force from a tiny electric motor. Here are some of its most frequent utilizes. You can also discover a gear motor in a lot of household appliances and vehicles.
Before deciding on a gearmotor, think about the requirements of the device you need to energy. You must contemplate its measurement, weight, and ambient situations, which consist of temperature regimes, noise amounts, and contaminating sources. You should also take into account the envelope dimension, mounting approach, and orientation. Other concerns consist of the predicted support lifestyle, upkeep scope, and management variety. The most ideal gearmotor for your particular software will be 1 that can handle the load.
The motor and gearbox sorts can be mixed and matched, depending on the software. A a few-section asynchronous motor and a permanent magnet synchronous servomotor are widespread options for these units. The sort of motor and gearbox combination you pick will figure out the power offer, the efficiency of the motor, and price. As soon as you realize the application, it will be effortless to integrate a equipment motor into your method.
When utilized in industrial purposes, gear motors are successful for lowering the pace of rotating shafts. 1 third of all industrial electric motor programs use gearing to minimize output pace. They can also save energy, which rewards the personnel who work them. In simple fact, industrial electric powered motor techniques are accountable for nearly a single-tenth of the carbon dioxide emissions that are developed by fossil-fueled energy plants. The good news is, efficiency and dependability are just two of the positive aspects of employing equipment motors.


Prior to selecting a gearmotor, it is critical to understand its technical specs. The key aspects to think about are the dimensions, fat, and sounds amount of the gearmotor. In addition, the electricity, torque, and pace of the motor are essential factors. Specs are also essential for its running environment, these kinds of as the temperature and the degree of ingress defense. Ultimately, it is essential to determine its duty cycle to make sure it will function appropriately. To pick a suited gearmotor, seek advice from the specifications of your application.
Some common apps of gearmotors incorporate packaging gear, conveyors, and material dealing with applications. They also appear with several advantages, which includes their capability to manage each place and velocity. This tends to make them ideal for applications exactly where velocity and positioning are vital. Parallel-shaft equipment units, for occasion, are typically utilized in conveyors, substance handling, and steel mills. They are also in a position to run in large-precision manufacturing. For these reasons, they are the most well-liked variety of gearmotor.
There are three common sorts of gears. Helical gears have tooth that are inclined at 90 degrees to the axis of rotation, producing them much more productive. Helicoidal gears, meanwhile, have a reduce sounds amount and are therefore chosen for apps necessitating high torque. Worm gears are chosen for applications in which torque and speed reduction are critical, and worm gears are suited for these conditions. They also have advantages above spur gears and worm gears.
The software of a equipment motor is practically limitless. From large equipment lifts to healthcare facility mattress lifting mechanisms, equipment motors make it feasible to use a tiny rotor at a higher pace. Their light-weight construction also makes it possible for them to move heavy loads, such as cranes, but they do so slowly. Equipment motors are an outstanding choice in programs in which area is an problem. A handful of frequent applications are reviewed below. When choosing a gear motor, bear in mind to pick the very best dimension and application for your needs.


A gearmotor’s pace is immediately proportional to the gear ratio. By dividing the input pace by the gear ratio, the output velocity can be established. Gear ratios earlier mentioned one particular minimize speed, although equipment ratios underneath one increase speed. Performance of a gearmotor is defined as its capacity to transfer power by way of its gearbox. This performance element normally takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve on request.
There are several factors that must be regarded when choosing a gearmotor. Very first, the software need to satisfy the sought after pace and torque. Next, the output shaft should rotate in the wanted course. Third, the load must be correctly matched to the gearmotor. And finally, the running atmosphere need to be regarded, like the ambient temperature and the amount of protection. These details will assist you uncover the ideal gearmotor. You can evaluate a variety of types of equipment motors on this website page and pick the one that will fulfill your demands.
The micro-DC gear motor is a single of the most functional types of geared motors. These motors are extensively employed in smart cars, robotics, logistics, and the sensible metropolis. Other applications incorporate precision devices, individual treatment resources, and cameras. They are also frequently identified in higher-finish automotives and are used in intelligent cities. They also locate use in a lot of fields such as outside experience equipment, pictures products, and electronics. The rewards of micro-DC equipment motors are numerous.
The principal perform of a gear motor is to decrease the pace of a rotating shaft. Tiny electric powered clocks, for illustration, use a synchronous motor with a 1,200-rpm output pace to drive the hour, minute, and next fingers. While the motor is little, the force it exerts is enormous, so it really is vital to make certain that the motor just isn’t above-powered. There is a substantial ratio in between the enter torque and the output torque.


The trustworthiness of a gear motor is dependent on a number of aspects, such as content high quality, machining precision, and working conditions. Equipment failure is typically more significant than surface fatigue, and can compromise private safety. Trustworthiness is also affected by the conditions of set up, assembly, and use. The following sections provide an overview of some essential variables that effect equipment motor dependability. This report supplies some ideas to improve gear motor reliability.
First and foremost, make confident you are acquiring from a dependable supplier. Equipment motors are high-priced, and there is no standardization of the sizes. If a gear breaks, changing it can consider a good deal of time. In the long operate, dependability wins above anything at all. But this does not indicate that you can disregard the importance of gears – the high quality of a equipment motor is a lot more crucial than how prolonged it lasts.


The expense of a gear motor is comparatively lower compared to that of other forms of electric motors. This type of motor is frequently utilized in funds counters, printers, sensible properties, and automation equipment. A DC gear motor is also generally employed in automated window devices, glass curtain partitions, and banknote vending devices. There are several benefits to utilizing a gear motor. Right here are a few of them. Read on to understand a lot more about them.
Speed administration is yet another advantage of a gear motor. The motors tend to have less put on and tear than other motors, which indicates much less regular replacements. Furthermore, several gear motors are effortless to install and call for much less routine maintenance, which also assists reduce the overall value of ownership. Lastly, due to the fact sound is a common issue for many digital OEMs, DC equipment motors are frequently quieter than their counterparts. For these motives, they are usually employed in industrial options.
One more benefit of an electric powered equipment motor is its size and electrical power. They are usually designed for 12V, 24V, and 48V voltages and two hundred-watt power. Their rated pace is 3000 rpm and their torque is .64 Nm. They are also a lot more trustworthy than their AC counterparts and are excellent for several industrial apps. They have a substantial ratio of a few to two, which can make them perfect for a selection of programs.
A gear motor is an electric powered motor that is coupled with a equipment teach. It utilizes AC or DC electricity, and is usually named a equipment reducer. The major objective of these gear reducers is to multiply torque, although preserving compact size and total efficiency. Nonetheless, the efficiency of a equipment motor is also afflicted by ambient temperature and lubricants. If the equipment motor is mounted in the incorrect spot, it may possibly be ineffective and outcome in premature failure of the equipment.

China OEM Three Phase 220V 380V 60W Induction AC Gear Motor     with Hot sellingChina OEM Three Phase 220V 380V 60W Induction AC Gear Motor     with Hot selling